1.經常檢查升降平臺的連接情況，如有松動應予擰緊。Lifting platform to remind you often check the connection of the lifting platform, if there is loose should be tightened.
2.各機構的制動器應經常進行檢查和調整制動瓦和制動輪的間隙，保證靈活可靠。在摩擦面上，不應有污物存在，遇有污物必須用汽油或稀料洗掉。The brake of each mechanism should always check and adjust the clearance between the brake pad and brake wheel to ensure the flexibility and reliability. In the friction surface, there should not be any dirt, dirt must use gasoline or thinner wash.
3.升降平臺要均按潤滑表中的要求進行。Lifting platform manufacturers to remind you to lift the platform should be based on the requirements of the lubrication table.
4.要注意檢查各部鋼絲繩有無斷絲和松股現象。Should pay attention to check the wire rope with no broken wire and loose phenomenon.
5.升降平臺及時更換液壓油。Lifting platform manufacturers to remind, in a timely manner to replace the hydraulic oil.
6.經常檢查升降平臺運轉是否正常，有無噪音，如發現故障，必須及時排除。Often check the operation of the lifting platform is normal, there is no noise, such as the failure to find, must be promptly ruled out.
請長按保存二維碼后點擊確定按鈕，進入微信掃一掃界面,點擊右上角‘相冊’選擇我們的二維碼,再點擊右上角‘完成’識別添加。
(為防止瀏覽器錯誤識別，請勿直接在瀏覽器中識別二維碼)
